Can you skateboard in chucks

Our initial list of 50 options has been painstakingly narrowed down to just the top favorites, so join us as we reminisce about some of the most loved, most respected, and most memorable shoes ever created to skate in. These are the best skate shoes. All Rights Reserved. Previous Slide Next Slide. Share This Story. Basically, the three types of shoes differ in the height of the shaft. Let us distinguish the individual types from one another:.

High-Tops are higher cut than other shoes. They usually end above the ankle. Thanks to the higher cut, high-tops offer more stability as well as additional padding and thus, more safety, protection and cushioning in the area of your ankles and ankles. Additionally, higher cut shoes will keep you warmer.

This can be an advantage when skating to keep your joints warm. Some high-top sneakers are also suitable as winter shoes because of their high cut. Mid-Tops are slightly higher cut than low-cut shoes, and the laces typically fall just under or directly at the ankle.

As a result, they offer a higher degree of stability, dampening, and support as compared to low-cut sneakers. Low-Top shoes are the flat standard models in the world of skate shoes and sneakers. Thanks to their lower cut, these models are usually more lightweight. You lose the padding in your ankle area in favour of the lighter weight and material.

The construction and texture of the sole are responsible for the comfort and feel of your shoe. Different soles are built into the same shoes to meet all the different requirements. Here you can find out more about the various kinds of soles and how they differ from each other.

The outsole is the most important component of a good skate shoe. It has to fulfil all of your wishes for grip, stability, and flexibility and must also be resistant to abrasion. In order to optimally meet all these needs, air-pads and other types of shock-absorbent cushioning are often integrated into the outsole.

Between the outer and inner sole lies the midsole. This is the main dampening component of the shoe and is made mostly of EVA ethyl vinyl acetate as well as phylon, a heat-resistant plastic. Almost all of the major shoe labels have developed their own midsole constructions.

You can learn exactly what each technology entails in our skate shoe wiki page. There are many models that offer diverse features. For extra cushioning, gel pillows are sewn into certain insoles. The curvature of an insole is also adapted to suit the needs of skaters.

Depending on the brand and model, there are different types of skate shoe insoles. There is also the Ortholite Insole. Some insoles rely on dual-density. There are also shoe inserts that are specifically fabricated for skateboarders. These provide even more dampening, which helps protect against injuries and relieve your joints. When it comes to skate shoes, a distinction is made between two different sole constructions: cup sole and vulcanised sole. Cup soles are sewn into the shoes, making them more robust, but at the same time, also somewhat heavier and more inflexible.

The greatest advantages of skate shoes with vulcanised soles are the lower weight and the higher flexibility thanks to a thinner sole. Such a sole construction results in an incredible board feel. Because, in contrast to the cup sole, the individual rubber parts are only glued to each other in vulcanised soles and adhered to the upper by a narrow rubber strip. This means you can jump on your board as soon as you get your shoes, without having to break them in first. The downside of this manufacturing process is that vulcanised shoes wear through relatively quickly and are more prone to abrasion.

The cup sole consists of three main parts: an outsole, a midsole made of highly elastic and lightweight foam, and a separate insole. The outsole is comprised of one piece. It is glued to the midsole securely at the upper and additionally sewn into the shoe, while the insole is either glued in or simply inserted. Due to the thick soles, however, these shoes are also heavier and less flexible than vulcanised soles and therefore take longer to be broken in.

Depending on the manufacturer, there are different shoe profiles that give both cup soles and vulcanised soles more flexibility, cushioning, board feel or grip. Among the best-known are the Herringbone profile and Waffle sole, which was exclusively developed for skateboarding by Vans. Nowadays, the trend is steadily moving in the direction of ultralight soles, such as the Nike Free sole, which is perfect for both sneakers and after-skate shoes.

Soles with thicker profiles are mainly used in winter and outdoor shoes to provide the necessary grip in snow and wet conditions. Tearing at the seams — every skater is familiar with it. Skate shoes are characterised by the fact that the seams in the more vulnerable areas of the shoes are specially reinforced and thus significantly reduce wear and tear. Nevertheless, the shoes should have double or even triple seams in the toecap and heel areas, because these spots wear through quickly due to the griptape.

These shoes are totally free of any interfering seams in the front toe area, and not only prevent blowouts but also make for a comfortable flick the snappy foot movement to make your board rotate.

Nonetheless, it is important to note that not every shoe is additionally reinforced at this spot, which is why seamless toe caps tend to be more frequent. When skating, your feet, ankles and joints are constantly subjected to severe stress. In order to reduce the impact of harder tricks, like when jumping gaps or stairs, many skate companies equip their shoe models with various forms of upholstery.

What about the star players? Because Pony Boy Curtis invented the no comply. Quote from: Nallid on June 30, , PM. Jake Trade Count: 0 Sr. Member Posts: Rep: Shoe goo? I used to skate regular chuck taylors years ago, back when slip ons were among my favorite skate shoes and I enjoyed a paper thin shoe? They had a really good sole once broken in, I remember skating that shoe surprisingly long. Nowadays I couldn't imagine having a real session in those things beyond cruising around.

They make em in suede now. Quote from: pinche gringo on June 30, , PM. OG chucks quality has been slipping for a while. I had a teacher tell me in the 60's the shoes had double canvas lining and what we have now is crap. Also since I've been wearing them I'm pretty sure they added that shitty felt on the bottom of the shoe. Anybody else that's been wearing them notice any difference in quality? GY Trade Count: 0 Jr. Member Posts: 95 Rep: Member Posts: 64 Rep: Quote from: jgonzalez on July 01, , AM.

I haven't owned any since they stopped making them in the USA coincidence, not political statement.